Thermal Hydraulic Evaluation of a proposed annular Fuel for VVER1000 Reactor
DOI:
https://doi.org/10.48165/Keywords:
Annular fuel, VVER-1000, ANSYS, Thermal Hydraulic of Thorium Based FuelAbstract
Thorium based fuel is a promising fuel as it reduces the radiation protection cost of safety and improves the fuel performance with high burnup capability. In this paper the core of VVER-1000 nuclear reactor is designed with (Th0.9U0.1) O2 annular fuel rod for internally and externallycooled (dual cooled) fuel. Thermal performance of the present case is analyzed using ANSYS CFD code. Equivalent cell including a fuel rod and its surrounding coolant within a hexagonal assembly in the hot channel is simulated to get the maximum fuel temperature and maximum clad temperature. The results are compared with the calculated results obtained for the conventional UO2 fuel rod. Critical Heat Flux (CHF) and minimum DNBR are obtained and validated. The results indicated that the maximum fuel temperature of (Th0.9U0.1) O2 annular fuel is lower than that of the UO2 fuel by about 530oK. Lower maximum temperature and flatten temperature distribution in the thorium-based annular fuel rod provides more thermal safety margin in the reactor.
References
Anantharaman, K.; Shivakumar, V.; and Saha, D. (2008): Utilization of thorium in reactors. Journal of Nuclear Materials, 383(1): 119.
ANSYS Workbench User Manual (2007): Version 11. Providence, RI, USA. Available at: http://www.pdfdrive.net.
Chaudri, K. S.; Tian, W.; Su, G.; and Qiu, S. (2013): Coupled neutronics/thermal hydraulics evaluation for thorium-based fuels in thermal spectrum SCWR. Progress in Nuclear Energy, 68: 55.
El-Wakil, M. M. (1971): Nuclear Heat Transport. 3rd ed. London: International Textbook Company.
IAEA-TECDOC-1496 (2006): Thermophysical Properties Database of Materials for Light Water Reactors and Heavy Water Reactors. International Atomic Energy Agency (IAEA).
Kazimi, M. S. (2007): Introduction to the annular fuel special issue. Nuclear Technology, 160(1): 2.
Lamarsh, J. R.; and Baratta, A. J. (2001): Introduction to Nuclear Engineering. 3rd ed. New Jersey: Prentice Hall.
Mousavizadeh, S. M.; Ansarifar, G. R.; and Talebi, M. (2015): Assessment of the TiO₂/water nanofluid effects on heat transfer characteristics in VVER-1000 nuclear reactor using CFD modeling. Nuclear Engineering and Technology, 47: 814.
Sinha, R. K.; and Kakodkar, A. (2006): Design and development of the AHWR—the Indian thorium-fuelled innovative nuclear reactor. Nuclear Engineering and Design, 236: 683.
UnaK, T. (2000): What is the potential use of thorium in future energy production technology? Progress in Nuclear Energy, 37: 137.
Zaidabadi, M.; Ansarifar, G. R.; and Esteki, M. H. (2017): Thermal hydraulic analysis of VVER-1000 nuclear reactor with dual-cooled annular fuel using K–ε SST turbulence model. Annals of Nuclear Energy, 101: 118.
Downloads
Published
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
