Yeast cells handling using home-made ultrasound Standing wave chamber design: an in vitro approach

Authors

  • M H moustafa Biomedical physics Department, Medical research institute, Alexandria University, Alexandria, Egypt. Author

DOI:

https://doi.org/10.21608/jntas.2021.43960.1029

Keywords:

cell trapping, ultrasound, standing waves, radiation forces, biotechnology

Abstract

Handling and manipulation of biological cells are fundamental for biotechnology applications like genes modification, membrane fusion, and drug researches. Cells in suspension can be handled by external applied force fields. This force can be immunological mainly depends on membrane binding criteria of living cells, or non-immunological methods utilize physical properties such as, cell size and shape. Hereby, dry baker’s yeast cells suspension were handled by the aid of simple homemade ultrasonic standing wave chamber operate at frequency 0.8 MHz, power intensities ranged of 0.5-3 W/cm2 in pulsed mode. Microscopic monitoring revealed cells trapping in nearly ultrasonic wave's interference nodes by the acoustic radiation forces. The effect acoustic on trapping time and velocity of the cell was investigated. The trapping behavior depends mainly on the cell size, ultrasound power intensity. Increasing the ultrasound intensity decreases the time consumed to trap cells. In summary, acoustic forces generated in standing wave mode may be a simple promising non invasive tool for biological cell handling for more biotechnology applications.

References

Doinikov, A. A., Gerlt, M. S., & Dual, J. (2020). Acoustic radiation forces produced by sharp-edge structures in microfluidic systems. Physical Review Letters, 124(15), 154501.

Doinikov, A., Thibault, P., & Marmottant, P. (2018). Acoustic streaming induced by two orthogonal ultrasound standing waves in a microfluidic channel. Ultrasonics, 87, 7.

Liang, S., & Chaohui, W. (2018). Revised model for the radiation force exerted by standing surface acoustic waves on a rigid cylinder. Physical Review E, 97.

Gröschl, M. (1996). Ultrasonic separation of suspended particles. Acustica Acta Acustica, 84, 432.

Hedrick, W., Hykes, D., & Starchman, D. (2005). Ultrasound physics and instrumentation. Elsevier Mosby.

Mizutani, H., & Saito, T. (2019). Innovative use of low-frequency ultrasound for particle separation/classification: Forces acting on a single particle held in water in 20-kHz ultrasound pressure fields in transition states under control of the acoustic pressure amplitude. Chemical Engineering Science, 206, 476.

Petersson, F., Nilsson, A., Holm, C., Jönsson, H., & Laurell, T. (2005). Continuous separation of lipid particles from erythrocytes by means of laminar flow and acoustic standing wave forces. Lab on a Chip, 5(1), 20.

Roohvand, F., Shokri, M., Abdollahpour-Alitappeh, M., & Ehsani, P. (2017). Biomedical applications of yeast—A patent view, Part One: Yeasts as workhorses for the production of therapeutics and vaccines. Expert Opinion on Therapeutic Patents, 27(8), 929.

Saito, M., Kitamura, N., & Terauchi, M. (2002). Ultrasonic manipulation of locomotive microorganisms and evaluation of their activity. Journal of Applied Physics, 92(12), 7581.

Taha, T., Soliman, A., & Eldosoky, M. (2017). Analysis improvement of standing surface acoustic wave microfluidic devices for bio-particle separation. International Journal of Computational Applications and Technology, 55(3), 244.

Wang, L., & Li, S. (2014). Acoustic field calculation of ultrasonic phased-array concave cylindrical transducer. Applied Mechanics and Materials, 716–717, 1111.

Wiklund, M., Günther, C., Lemor, R., Jäger, M., Fuhr, G., & Hertz, H. (2006). Ultrasonic standing wave manipulation technology integrated into a dielectrophoretic chip. Lab on a Chip, 6(12), 1537.

Downloads

Published

2021-03-02

How to Cite

Yeast cells handling using home-made ultrasound Standing wave chamber design: an in vitro approach. (2021). Journal of Nuclear Technology in Applied Science, 9(1), 13-18. https://doi.org/10.21608/jntas.2021.43960.1029